Kowald, Torsten
Preferred name
Kowald, Torsten
2 results
Now showing 1 - 2 of 2
- Some of the metrics are blocked by yourconsent settings
Publication Access status: Metadata only , Influence of iron doped TiO<sub>2</sub> nanotubes on the hydration of tricalcium silicateEnvironmental pollution is one of biggest challenges facing the world. The promising technology to control this problem is utilization of semiconductor materials as photocatalyst. It is well known that normal TiO 2 showing photocatalytic activity in the UV light, so to decrease the band gap and shifting into visible light, titanium dioxide nanotubes was doped with Fe 3+ ions. The influence of fabricated Fe‐doped TiO 2 nanotubes (Fe/TiNTs) on the hydration of tricalcium silicate (C 3 S) have been studied. Addition of 1.0 wt%, 2.0 wt% and 3.0 wt% of Fe/TiNTs into C 3 S system significantly accelerated the course of hydration. Study on the hydration products after 8h, 1d and 7d improved the degree of hydration. The enhancing of compressive strength of hydrated C 3 S after 7d, 14d and 28d was observed comparing to the normal TiO 2 nanotubes (TiNTs). Also treating both Fe/TiNTs and TiNTs with supersaturated Ca(OH) 2 solution revealed a strong interaction between Ca 2+ ‐ ions and nanotubes particularly in the presence of iron (Fe/TiNTs). The specific surface area of hydration products in the presence of Fe/TiNTs was increased. In this study, isothermal calorimetry was utilized for the course of hydration, x‐ ray powder diffraction (XRD) for the phase composition in combination with simultaneous thermal analysis (STA) and gas adsorption (GA) for measuring specific surface area of nanotubes and hydration products.Source Type:Article3 - Some of the metrics are blocked by yourconsent settings
Publication Access status: Metadata only , Synthesis and Characterization of Iron-Doped TiO2 Nanotubes (Fe/TiNTs) with Photocatalytic ActivityOne of the most significant global challenges for humans is environmental pollution. The technology to control this problem is the utilization of semiconductors as photocatalysts. In the current study, iron-doped titania nanotubes (Fe/TiNTs) with increased photocatalytic effect were synthesized via a modified hydrothermal method. The products were characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy (TEM), gas adsorption, electron spin resonance (ESR) and UV–Vis diffuse reflectance spectroscopy (DRS). TEM results indicated that Fe/TiNTs have a tubular and uniform structure with an average outer diameter of 23–48 nm and length of 10–15 µm. ESR and DRS revealed that Fe3+ ions were successfully introduced into the TiNT structure by replacing Ti4+ ions. An enhanced light absorption in the range of 400–600 nm additionally indicated successful doping. The band gap was narrowed as iron wt% was increased. The photocatalytic activity was evaluated by the degradation of methyl orange (MO) in the presence of Fe/TiNTs and TiTNs by monitoring the degradation of MO under UV light irradiation. An acceleration on the hydration of Portland cement was observed in the presence of 2.0 wt% Fe/TiNTs. Fe/TiNTs can be used as a nanomaterial in cement-based building materials to provide self-cleaning properties to the surface of concrete even in indoor environments.Source Type:Article7
