Weinberg, Kerstin
5 results
Now showing 1 - 5 of 5
- Some of the metrics are blocked by yourconsent settings
Publication Access status: Metadata only , Continuum-kinematics-based peridynamics and phase-field approximation of non-local dynamic fractureIn this work, two non-local approaches to dynamic fracture are investigated: a novel peridynamic formulation and a variational phase-field approach. The chosen continuum-kinematics-based peridynamic model extends the current peridynamic models by introducing surface and volume-based interactions. The phase-field fracture approach optimizes the body’s potential energy and provides a reliable method for predicting fracture in finite element computations. Both methods are able to efficiently compute crack propagation even when the cracks have arbitrary or complex patterns. We discuss the relations of critical fracture parameters in the two methods and show that our novel damage model for the continuum-kinematics-based peridynamics effectively manages fracture under dynamic loading conditions. Numerical examples demonstrate a good agreement between both methods in terms of crack propagation, fracture pattern, and in part, critical loading. We also show the limitations of the methods and discuss possible reasons for deviations.Source Type:Article4 - Some of the metrics are blocked by yourconsent settings
Publication Access status: Metadata only , Data‐driven finite element computation of microstructured materials(2023)This paper presents a model‐free data‐driven strategy for linear and non‐linear finite element computations of open‐cell foam. Employing sets of material data, the data‐driven problem is formulated as the minimization of a distance function subjected to the physical constraints from the kinematics and the balance laws of the mechanical problem. The material data sets of the foam are deduced here from representative microscopic material volumes. These volume elements capture the stochastic characteristics of the open‐cell microstructure and the properties of the polyurethane material. Their computation provides the required stress‐strain data used in the macroscopic finite element computations without postulating a specific constitutive model. The paper shows how to derive suitable material data sets for the different cases of (non‐)linear and (an‐)isotropic material behavior efficiently. The numerical example of a rubber sealing illustrates possible areas of application, and the proposed strategy's versatility.Source Type:Article3 - Some of the metrics are blocked by yourconsent settings
Publication Access status: Metadata only , Experimental Investigation of Unidirectional Glass-Fiber-Reinforced Plastics under High Strain RatesWhen a vehicle leaves the road, crash barriers stop it and prevent significant damage to the vehicle, its environment, and the occupants. Typically, such protection systems are made of simple steel, but fiber-reinforced composites can efficiently absorb and dissipate the impact energy at high-risk locations. In order to design such protective systems, material parameters under dynamic loading are necessary. Here, split Hopkinson pressure bar tests with unidirectional glass-fiber-reinforced epoxy of 58% glass fiber content are performed. The elastic response at strain rates between 300/s and 700/s in the loading direction parallel and perpendicular to the fiber is determined. From the measured data, a model of the time dependence of the elastic modulus is derived to enable the design engineer to lay out protective systems made of such GFRPs.Source Type:Article3 - Some of the metrics are blocked by yourconsent settings
Publication Access status: Metadata only , Peridynamic computations for thin elastic rodsPeridynamics is a nonlocal continuum mechanics formulation well suited for simulating dynamic fracture phenomena. Various peridynamic material formulations have been developed in recent years. These models have some differences, particularly regarding the correct handling of elastic deformation. This study investigates the elastic wave propagation characteristics of bond‐based, ordinary state‐based, continuum‐kinematics‐inspired peridynamics and a local continuum consistent correspondence formulation. Specifically, it examines the behavior of longitudinal pressure waves within thin rods. While all formulations demonstrate adequate wave propagation handling, all except the correspondence formulation are sensitive to incomplete horizons. In contrast, the local continuum consistent formulation exhibits outstanding accuracy in modeling wave propagation. Moreover, the fascinating “spaghetti fracture” phenomenon, where a bent thin rod always breaks into three or more pieces, motivates additional investigations. It is shown that reproducing a different number of fragments using peridynamic simulations is possible. Although initial experiments can be replicated, the sensitivity to numerous parameters necessitates further investigations for a more comprehensive understanding and validation.Source Type:Article3 - Some of the metrics are blocked by yourconsent settings
Publication Access status: Metadata only , Topology Optimization with Matlab: Geometrically Non-Linear Optimum Solid Structures at Random Force Strengths(2023); ; This paper aims to investigate multiple large-strain topology-optimized structures, by interpreting their overlay as a probability density function. Such a strategy is suited to finding an optimum design of silicon electrodes subject to a random contact. Using this method, and prescribing a zero net-force constraint on the global system, the optimum structure is identified with a Schwarz P minimum-surface structure. Then, the optimum structure is subject to chemo-mechanically coupled cycling, in terms of an irreversible thermodynamic process, which shows the interplay between the mechanical and chemical fields. The Matlab-based optimization code is attached.Source Type:Article1
