Engel, Bernd
Preferred name
Engel, Bernd
2 results
Now showing 1 - 2 of 2
- Some of the metrics are blocked by yourconsent settings
Publication Access status: Open Access , Brittle fracture of notched components fabricated by stereolithographySince additive manufacturing (AM, i.e., 3D printing) has been widely used for production of end-used products, the mechanical strength of parts fabricated by this technology have gained considerable significance. The current study presents fracture load assessment of 3D-printed components fabricated by the stereolithography (SLA) technique using UV sensitive resin material. In this context, dumbbell-shaped specimens were printed and tested to determine basic mechanical properties. Moreover, V-notched semi-circular bending test coupons with various notch opening angles (i.e., 15°, 30°, 45°, 60°, 75°, and 90°) were printed and examined. Parallel to the experimental tests, we developed a finite element model to simulate the load carrying performance of 3D-printed parts. Moreover, we used the digital image correlation technique to determine displacement and strain field on the surface of the examined specimens. Since the mechanical strength and fracture behavior of 3D-printed parts are investigated in the current study, the presented outcomes can be utilized for innovative designs of parts fabricated by SLA with a higher mechanical strength, and improved load-carrying capacity.Source Type:Article7 10 - Some of the metrics are blocked by yourconsent settings
Publication Access status: Open Access , Mixed mode brittle fracture of stereolithographic 3D-printed partsTechnical advances in additive manufacturing (AM), also known as three-dimensional (3D) printing, have led to applications of this technology in creation of end-use items. Consequently, performance and the mechanical strength of AMed parts have become of significant importance. In this research, fracture behavior and crack propagation of AMed cracked plates are investigated. To this aim, the stereolithography (SLA) technique is used to fabricate square plate specimens with a hole in the center and radial cracks that started at the perimeter of the central hole. Here, full range of mixed-mode fracture (from pure mode I to pure mode II) are obtained by altering the angle between the crack and the applied load. We used the finite element method to determine stress intensity factors. This study deals with a series of experiments on 3D-printed cracked plates to study mixed-mode fracture and crack propagation in brittle fracture of SLA 3D-printed components. Additionally, the digital image correlation technique was used to determine strain field on the surface of the specimens. As SLA is one of the most commonly used concepts in polymer 3D printing and has garnered significant attention for fabrication of complex structural elements, the outcomes of this study are useful for next developments and innovative designs of 3D-printed polymeric components.Source Type:Article326 174
