Reinicke, Tamara
Preferred name
Reinicke, Tamara
2 results
Now showing 1 - 2 of 2
- Some of the metrics are blocked by yourconsent settings
Publication Access status: Open Access , Mixed mode brittle fracture of stereolithographic 3D-printed partsTechnical advances in additive manufacturing (AM), also known as three-dimensional (3D) printing, have led to applications of this technology in creation of end-use items. Consequently, performance and the mechanical strength of AMed parts have become of significant importance. In this research, fracture behavior and crack propagation of AMed cracked plates are investigated. To this aim, the stereolithography (SLA) technique is used to fabricate square plate specimens with a hole in the center and radial cracks that started at the perimeter of the central hole. Here, full range of mixed-mode fracture (from pure mode I to pure mode II) are obtained by altering the angle between the crack and the applied load. We used the finite element method to determine stress intensity factors. This study deals with a series of experiments on 3D-printed cracked plates to study mixed-mode fracture and crack propagation in brittle fracture of SLA 3D-printed components. Additionally, the digital image correlation technique was used to determine strain field on the surface of the specimens. As SLA is one of the most commonly used concepts in polymer 3D printing and has garnered significant attention for fabrication of complex structural elements, the outcomes of this study are useful for next developments and innovative designs of 3D-printed polymeric components.Source Type:Article326 174 - Some of the metrics are blocked by yourconsent settings
Publication Access status: Open Access , Static and dynamic characterization of 3D-printed polymer structural elementsConsidering wide applications of Additive Manufacturing (AM), profound knowledge on the mechanical performance of AMed components is a necessity. In the present study, the mechanical behavior of AMed polymer parts under static and dynamic tests has been investigated. To this end, cantilever beams with three different mesostructure cells were designed and fabricated via ABS Carbon material based on the fused deposition modeling process. The specimens were subjected to a series of static bending tests and free vibration experiments. In addition, numerical models have been presented for both static bending and the dynamic tests. In the current study, digital image correlation technique has been employed to determine strain field and validate the numerical results. The experimental findings and numerical outcomes have been compared and the convergence has been investigated. Based on the applications of AM in fabrication of structural elements with complex geometries, the results of the current study are useful for new designs of AMed parts with customized mechanical strength and enhanced structural performance.Source Type:Article4 106
