Please use this identifier to cite or link to this item:
Files in This Item:
File Description SizeFormat
izarra.pdf12,94 MBAdobe PDFThumbnail
Dokument Type: Doctoral Thesis
Title: Second moment modelling for the numerical simulation of passive scalar dispersion of air pollutants in urban environments
Authors: Izarra Garcia, Rafael 
Institute: Institut für Fluid- und Thermodynamik 
Free keywords: Turbulent scalar fluxes, anisotropic modelling, MUST, atmospheric dispersion, model improvement
Dewey Decimal Classification: 620 Ingenieurwissenschaften und Maschinenbau
GHBS-Clases: WDC
Issue Date: 2009
Publish Date: 2011
Since the Industrial Revolution mankind has needed to deal with increasing air pollution problems as a result of manufacturing, mining, transportation, and power production. Air pollution concerns the interaction of gases and particles emitted into the atmosphere with the surrounding environment. This interaction can redirect pollutants toward sensitive areas, concentrate different species above acceptable levels, or even mitigate concentration levels by enhancing diffusion and dispersion. The present EU environmental legislation has been implemented to control these high pollutant concentrations and improve the air quality conditions in urban areas. The numerical simulation of dispersion has shown to be a useful tool for both the scientific description of pollution phenomena and for planning and decision making.
The numerical simulation of pollution dispersion in urban environments by means of solution of the statistically steady Reynolds Averaged Navier Stokes (RANS) equations is known to be strongly dependent on turbulence models. If pollution dispersion is modelled, the turbulence models do not only have to be used for the Reynolds stresses, but also for the turbulent scalar fluxes. While the influence of several turbulence models for Reynolds stresses on pollution dispersion in urban environments has already been examined several times, the turbulent scalar fluxes are usually modelled by the simple gradient diffusion assumption. In the present work, the influence of more advanced models for the turbulent scalar fluxes on the dispersion of pollutants is examined. Two different wind tunnel experiments, a two-dimensional (2D) street canyon and a three-dimensional (3D) urban area model, were selected for the validation of the models' performance. In total, five anisotropic algebraic flux models and two second moment models were implemented in the commercial software FLUENT 6.3. All these models together with the simple gradient diffusion model (with different turbulent Schmidt numbers) are used and the results are compared with measurements using statistical performance measures to assess their predictive capability.
All evaluated models showed good general agreement in comparison to the experiments. The anisotropic models provided better concentration predictions than the isotropic models in 2D simulations. However, these improvements were very small in 3D simulations and usually disappeared. In the end, modelling improvements based on the sensitivity analysis of model coefficients, numerical and experimental model limitations and other parameters and assumptions relevant for the simulation of passive scalar pollution dispersion are presented and discussed.
URN: urn:nbn:de:hbz:467-4896
Appears in Collections:Hochschulschriften

This item is protected by original copyright

Show full item record

Page view(s)

checked on Jan 23, 2021


checked on Jan 23, 2021

Google ScholarTM


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.