Schönherr, Holger
10 results
Now showing 1 - 10 of 10
- Some of the metrics are blocked by yourconsent settings
Publication Access status: Metadata only , Anodic Aluminum Oxide Membrane Assisted Extrusion of Polymer Solutions for Hydrogel FormationThe potential of polymeric nanostructures obtained by extruding polymer solutions through reusable anodic aluminum oxide (AAO) nanopores for the fabrication of nanostructures is investigated systematically to be able to unveil the potential impact of structure on cell culturing. Thus, nanostructured Na‐alginate and poly(vinyl alcohol) (PVA) polymers as well as blended alginate/PVA hydrogels are fabricated. Na‐alginate and PVA fibers with different dimensions can be obtained. By extruding Na‐alginate solutions into a non‐solvent also networks of uniform nanofibers (diameter <20 nm) are generated. PVA forms agglomerations of nanofibers and nanopArticles with diameter >100 nm. In ADDition, cell line‐dependent behavior of the cross‐linked PVA/alginate nanofibers is observed, which is characterized by reduced cell adhesion and cluster formation of PaTu 8988t cells on these blend nanofibers compared to normal cell adhesive behavior of NIH 3T3 cells.Source Type:Article4 - Some of the metrics are blocked by yourconsent settings
Publication Access status: Open Access , Biosensing with a scanning planar Yagi-Uda antennaWe investigate a model bioassay in a liquid environment using a z-scanning planar Yagi-Uda antenna, focusing on the fluorescence collection enhancement of ATTO-647N dye conjugated to DNA (deoxyribonucleic acid) molecules. The antenna changes the excitation and the decay rates and, more importantly, the emission pattern of ATTO-647N, resulting in a narrow emission angle (41°) and improved collection efficiency. We efficiently detect immobilized fluorescently-labeled DNA molecules, originating from solutions with DNA concentrations down to 1 nM. In practice, this corresponds to an ensemble of fewer than 10 ATTO-647N labeled DNA molecules in the focal area. Even though we use only one type of biomolecule and one immobilization technique to establish the procedure, our method is versatile and applicable to any immobilized, dye-labeled biomolecule in a transparent solid, air, or liquid environment.Source Type:Article318 130 - Some of the metrics are blocked by yourconsent settings
Publication Access status: Metadata only , Boosting the Cell Harvesting Performance of Poly(di(ethylene glycol)methyl ether methacrylate) Cell Release Layers via Copolymerization of Photo‐ and Thermoresponsive MonomersThe performance of the cell‐selective thermoresponsive poly(di(ethylene glycol)methyl ether methacrylate) (PDEGMA) cell harvest system is shown to be drastically enhanced by exploiting the combination of photoresponsive spiropyran derivates and PDEGMA in copolymerized brushes. The analysis of copolymerized 1′‐(2‐methacryloxyethyl)‐3′,3′‐dimethyl‐6‐nitrospiro(2 H ‐1‐benzopyran‐2,2′‐indoline) (SPMA) (DEMGA) di(ethylene glycol)methyl ether methacrylate brushes revealed that a minor adjustment of the SPMA/DEGMA ratios results in a significant alternation of wettability as well as protein adsorption, when switching the temperature from 37 to 22 °C and alternately irradiating using different light wavelengths (from 530 to 365 nm). Thin P(SPMA‐ co ‐DEGMA) layers supported pancreatic tumor PaTu 8988t cells with high cell viability. Copolymer layers with 2.5% SPMA/DEGMA led to the highest efficiency of enzyme‐free cell release with very good cell viability. The release is induced by cooling the cell culture medium to 22 °C and irradiating the surface with 365 nm light. Compared to neat PDEGMA, the P(SPMA‐ co ‐DEGMA) layers showed a threefold increase in the speed of the change of cell morphology of the attached cells and a >5 times increased fraction of detached cells, which underlines the potential of these dual responsive PDEGMA systems for optimized performance in the facile capture, culture, and release of different cell lines.Source Type:Article2 - Some of the metrics are blocked by yourconsent settings
Publication Access status: Metadata only , 4 - Some of the metrics are blocked by yourconsent settings
Publication Access status: Metadata only , Fluorimetric Cell Analysis with 9‐Aryl‐Substituted Berberine Derivatives as DNA‐Targeting Fluorescent ProbesDNA‐sensitive fluorescent light‐up probes based on berberine are presented. This biogenic fluorophore was chosen as central unit to use its potential biocompatibility and its DNA‐binding properties. To provide predictable fluorescence quenching in aqueous solution and a fluorescence light‐up effect upon DNA binding, aryl substituents were attached at the 9‐position by Suzuki‐Miyaura coupling reactions. The 9‐arylberberine derivatives have a very low fluorescence quantum yield ( Φ fl =<0.02), which is caused by the radiationless deactivation of the excited state by torsional relaxation about the biaryl axis. In addition, these berberine derivatives intercalate into DNA with high affinity ( K b =2.0−22×10 4 M −1 ). Except for the nitrophenyl‐ and hydroxyphenyl‐substituted derivatives, all tested compounds exhibited a pronounced fluorescence light‐up effect upon association with DNA, because the deactivation of the excited‐state by torsional relaxation is suppressed in the DNA binding site. Most notably, it was shown exemplarily with the 9‐(4‐methoxyphenyl)‐ and the 9‐(6‐methoxynaphthyl)‐substituted derivatives that these properties are suited for fluorimetric cell analysis. In particular, these probes generated distinct staining patterns in eukaryotic cells (NIH 3T3 mouse fibroblasts), which enabled the identification of nuclear substructures, most likely heterochromatin or nucleoli, respectively.Source Type:Article2 - Some of the metrics are blocked by yourconsent settings
Publication Access status: Metadata only , Interlayer Affected Diamond Electrochemistry(2024); ; ; ; Diamond electrochemistry is primarily influenced by quantities of sp 3 ‐carbon, surface terminations, and crystalline structure. In this work, a new dimension is introduced by investigating the effect of using substrate‐interlayers for diamond growth. Boron and nitrogen co‐doped nanocrystalline diamond (BNDD) films are grown on Si substrate without and with Ti and Ta as interlayers, named BNDD/Si, BNDD/Ti/Si, and BNDD/Ta/Ti/Si, respectively. After detailed characterization using microscopies, spectroscopies, electrochemical techniques, and density functional theory simulations, the relationship of composition, interfacial structure, charge transport, and electrochemical properties of the interface between diamond and metal is investigated. The BNDD/Ta/Ti/Si electrodes exhibit faster electron transfer processes than the other two diamond electrodes. The interlayer thus determines the intrinsic activity and reaction kinetics. The reduction in their barrier widths can be attributed to the formation of TaC, which facilitates carrier tunneling, and simultaneously increases the concentration of electrically active defects. As a case study, the BNDD/Ta/Ti/Si electrode is further employed to assemble a redox‐electrolyte‐based supercapacitor device with enhanced performance. In summary, the study not only sheds light on the intricate relationship between interlayer composition, charge transfer, and electrochemical performance but also demonstrates the potential of tailored interlayer design to unlock new capabilities in diamond‐based electrochemical devices.Source Type:Article5 - Some of the metrics are blocked by yourconsent settings
Publication Access status: Metadata only , Mild Quantitative One Step Removal of Macrophages from Cocultures with Human Umbilical Vein Endothelial Cells Using Thermoresponsive Poly(Di(Ethylene Glycol)Methyl Ether Methacrylate) Brushes(2023); The authors report on a mild, label‐free, and fast method for the separation of human umbilical vein endothelial cells (HUVEC), which are relevant cells, whose use is not limited to studies of endothelial dysfunction, from cocultures with macrophages to afford HUVEC in ≈100% purity. Poly(di(ethylene glycol)methyl ether methacrylate) (PDEGMA) brushes with a dry thickness of (5 ± 1) nm afford the highly effective one‐step separation by selective HUVEC detachment, which is based on the brushes' thermoresponsive behavior. Below the thermal transition at 32 °C the brushes swells and desorbs attached proteins, resulting in markedly decreased cell adhesion. Specifically, HUVEC and macrophages, which are differentiated from THP‐1 monocytes, are seeded and attached to PDEGMA brushes at 37°C. After decreasing the temperature to 22°C, HUVEC shows a decrease in their cell area, while the macrophages are not markedly affected by the temperature change. After mild flushing with a cell culture medium, the HUVEC can be released from the surface and reseeded again with ≈100% purity on a new surface. With this selective cell separation and removal method, it is possible to separate and thereby purify HUVEC from macrophages without the use of any releasing reagent or expensive labels, such as antibodies.Source Type:Article1 - Some of the metrics are blocked by yourconsent settings
Publication Access status: Metadata only , On‐Demand Cell Sheet Release with Low Density Peptide‐Functionalized Non‐LCST Polymer BrushesCell sheet harvesting offers a great potential for the development of new therapies for regenerative medicine. For cells to adhere onto surfaces, proliferate, and to be released on demand, thermoresponsive polymeric coatings are generally considered to be required. Herein, an alternative approach for the cell sheet harvesting and rapid release on demand is reported, circumventing the use of thermoresponsive materials. This approach is based on the end‐group biofunctionalization of non‐thermoresponsive and antifouling poly(2‐hydroxyethyl methacrylate) (p(HEMA)) brushes with cell‐adhesive peptide motifs. While the nonfunctionalized p(HEMA) surfaces are cell‐repellant, ligation of cell‐signaling ligand enables extensive attachment and proliferation of NIH 3T3 fibroblasts until the formation of a confluent cell layer. Remarkably, the formed cell sheets can be released from the surfaces by gentle rinsing with cell‐culture medium. The release of the cells is found to be facilitated by low surface density of cell‐adhesive peptides, as confirmed by X‐ray photoelectron spectroscopy. Additionally, the developed system affords possibility for repeated cell seeding, proliferation, and release on previously used substrates without any additional pretreatment steps. This new approach represents an alternative to thermally triggered cell‐sheet harvesting platforms, offering possibility of capture and proliferation of various rare cell lines via appropriate selection of the cell‐adhesive ligand.Source Type:Article4 - Some of the metrics are blocked by yourconsent settings
Publication Access status: Metadata only , Photodynamic Eradication of Pseudomonas aeruginosa with Ru-Photosensitizers Encapsulated in Enzyme Degradable NanocarriersThe development of new approaches for the treatment of the increasingly antibiotic-resistant pathogen Pseudomonas aeruginosa was targeted by enhancing the effect of local antimicrobial photodynamic therapy (aPDT) using poly(ethylene glycol)-block-poly(lactic acid) (PEG114-block-PLAx) nanocarriers that were loaded with a ruthenium-based photosensitizer (PS). The action of tris(1,10-phenanthroline) ruthenium (II) bis(hexafluorophosphate) (RuPhen3) encapsulated in PEG114-block-PLAx micelles and vesicles was shown to result in an appreciable aPDT inactivation efficiency against planktonic Pseudomonas aeruginosa. In particular, the encapsulation of the PS, its release, and the efficiency of singlet oxygen (1O2) generation upon irradiation with blue light were studied spectroscopically. The antimicrobial effect was analyzed with two strains of Pseudomonas aeruginosa. Compared with PS-loaded micelles, formulations of the PS-loaded vesicles showed 10 times enhanced activity with a strong photodynamic inactivation effect of at least a 4.7 log reduction against both a Pseudomonas aeruginosa lab strain and a clinical isolate collected from the lung of a cystic fibrosis (CF) patient. This work lays the foundation for the targeted eradication of Pseudomonas aeruginosa using aPDT in various medical application areas.Source Type:Article2 - Some of the metrics are blocked by yourconsent settings
Publication Access status: Metadata only , Spectroscopic Investigation of the Quadruplex DNA‐Binding Properties of 9‐Aryl‐Substituted Isoquinolinium DerivativesThe spectroscopic investigation of the binding properties of berberine‐type 9‐aryl‐substituted isoquinolinium derivatives with G‐quadruplex DNA (G4‐DNA) are presented. Photometric titrations show that these ligands bind with high affinity to the telomeric G4‐DNA form 22AG ( K =1.0–44×10 5 M −2 ). Furthermore, fluorimetric analysis of thermal DNA denaturation (FRET melting) reveals a significant thermal stabilization of G4‐DNA 22AG upon association with the methoxy‐substituted derivatives. As an analytically useful property, the derivatives with a phenyl substituent or with additional electron‐donating groups show a very weak fluorescence intensity, which increased significantly upon G4‐DNA complexation (fluorescence light‐up effect). Additional time‐resolved fluorescence spectroscopy indicated increased fluorescence lifetimes of the DNA‐bound 9‐(4‐methoxyphenyl)‐substituted derivative, when interacting with the quadruplex‐forming strand 22AG . Notably, the changes of the steady‐state and time‐resolved emission properties of the ligand are more pronounced with G4‐DNA than with duplex DNA so that the combination of these complementary methods may be used for the selective G4‐DNA detection.Source Type:Article2
